<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>精密测量技术论坛 - 【Zeiss_Calypso_蔡司】</title>
    <link>https://www.ommcmm.com/forum-3-1.html</link>
    <description>Latest 20 threads of 【Zeiss_Calypso_蔡司】</description>
    <copyright>Copyright(C) 精密测量技术论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 07 Jul 2026 07:50:34 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.ommcmm.com/static/image/common/logo_88_31.gif</url>
      <title>精密测量技术论坛</title>
      <link>https://www.ommcmm.com/</link>
    </image>
    <item>
      <title>【Zeiss_Calypso_蔡司】-RPS和P6坐标系建立</title>
      <link>https://www.ommcmm.com/thread-3385-1-1.html</link>
      <description><![CDATA[【Zeiss_Calypso_蔡司】-RPS和P6坐标系建立]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>biubiubiu</author>
      <pubDate>Sun, 05 Jul 2026 07:43:03 +0000</pubDate>
    </item>
    <item>
      <title>Zeiss_Calypso_蔡司 基本培训计划</title>
      <link>https://www.ommcmm.com/thread-2673-1-1.html</link>
      <description><![CDATA[Zeiss_Calypso_蔡司 基本培训计划]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>三坐标</author>
      <pubDate>Fri, 05 Jun 2026 08:33:40 +0000</pubDate>
    </item>
    <item>
      <title>Calypso 2021 通用测量 操作篇（例题集）</title>
      <link>https://www.ommcmm.com/thread-2629-1-1.html</link>
      <description><![CDATA[Calypso 2021 通用测量 操作篇（例题集）]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>林祖夏</author>
      <pubDate>Wed, 03 Jun 2026 12:42:29 +0000</pubDate>
    </item>
    <item>
      <title>Calypso 三坐标故障检查</title>
      <link>https://www.ommcmm.com/thread-2628-1-1.html</link>
      <description><![CDATA[Calypso 三坐标故障检查]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>林祖夏</author>
      <pubDate>Wed, 03 Jun 2026 12:37:26 +0000</pubDate>
    </item>
    <item>
      <title>请教一下大佬们  这位置度能给两个圆吗？需要带平面吗</title>
      <link>https://www.ommcmm.com/thread-2605-1-1.html</link>
      <description><![CDATA[请教一下大佬们  这位置度能给两个圆吗？需要带平面吗]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>陌上荏行</author>
      <pubDate>Tue, 02 Jun 2026 14:00:21 +0000</pubDate>
    </item>
    <item>
      <title>📑Calypso的报告生成及制作</title>
      <link>https://www.ommcmm.com/thread-1991-1-1.html</link>
      <description><![CDATA[Calypso的报告生成及制作


📑 Calypso 报告生成与制作（GitHub 风格 + 图标）蔡司三坐标｜测量报告模板设计、输出与定制全流程
适用：Calypso 5.6+、三坐标检测、品质报表、客户审核
目标：做出专业、可追溯、可自动输出的测量报告


[hr]
🎯 一、Calypso 报告是什么？ ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>没头脑不高兴</author>
      <pubDate>Mon, 18 May 2026 11:35:11 +0000</pubDate>
    </item>
    <item>
      <title>Calypso_VAST 操作手册</title>
      <link>https://www.ommcmm.com/thread-1975-1-1.html</link>
      <description><![CDATA[Calypso_VAST 操作手册]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>金玉首饰厂</author>
      <pubDate>Thu, 13 Feb 2020 07:30:11 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之RPS坐标系</title>
      <link>https://www.ommcmm.com/thread-1983-1-1.html</link>
      <description><![CDATA[于坐标系的先容，请参考相关文章：
Calypso应用之坐标系先容与标准方法建立坐标系Calypso应用之3D最佳拟合坐标系一. RPS先容- 摘自文章“RPS在车身精度设计上的应用”，陈晓华 黄金陵（吉林大学）RPS: Reference Point System，定位基准系统。基准系统中的每个定位点叫 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>林书磊</author>
      <pubDate>Thu, 29 Dec 2016 03:46:01 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之VAST MT库位盒校准</title>
      <link>https://www.ommcmm.com/thread-1974-1-1.html</link>
      <description><![CDATA[VAST MT库位盒样式如下：
通过使用位架可以实现探针自动更换，收缩整体测量时间。VAST MT库位盒校准方法：
安装主探针，打开自动更换探针窗口；

点击编辑，选择添加库位，范例“MT”。 如有多个库位盒，重复当前操作若干次。
   
自定义输入“库位盒”名称，然后点击确 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>勘探营地</author>
      <pubDate>Thu, 29 Dec 2016 03:17:16 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之3D最佳拟合坐标系</title>
      <link>https://www.ommcmm.com/thread-1984-1-1.html</link>
      <description><![CDATA[Calypso软件的坐标系相干介绍，参考文章：Calypso应用之坐标系介绍与标准方法建立坐标系Calypso应用技巧之点云建立3D最佳拟合坐标系
3d最佳拟合坐标系原理简图：理论点和实测点的总体毛病Σ会随着坐标系的不断拟合，越来越趋近于0.（实际中会设定一个参考值δ，当总体毛 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>睡个懒觉</author>
      <pubDate>Thu, 27 Oct 2016 03:52:21 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之3D最佳拟合坐标系</title>
      <link>https://www.ommcmm.com/thread-1972-1-1.html</link>
      <description><![CDATA[Calypso软件的坐标系相关介绍，参考文章：Calypso应用之坐标系介绍与标准方法建立坐标系Calypso应用本领之点云建立3D最佳拟合坐标系
3d最佳拟合坐标系原理简图：理论点和实测点的总体偏差Σ会随着坐标系的不断拟合，越来越趋近于0.（实际中会设定一个参考值δ，当总体偏 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>郑涛说事</author>
      <pubDate>Fri, 21 Oct 2016 07:27:50 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之不显示测量点法线</title>
      <link>https://www.ommcmm.com/thread-1980-1-1.html</link>
      <description><![CDATA[如下图所示，测量的点会表现法线方向。有的时间是否感觉箭头太大或者太小？ 那么如何进行调解呢？
操作方法：
CAD-参数

注：不同软件版本的界面会有差异
策略 - 修改“箭头长度(in%)”
注：数字变小，箭头相应变小如下图所示，箭头长度分别改成“2”和“10”，箭头的表 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>麒宝</author>
      <pubDate>Fri, 21 Oct 2016 01:36:02 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之钣金孔丈量</title>
      <link>https://www.ommcmm.com/thread-1981-1-1.html</link>
      <description><![CDATA[钣金件加工的主要三大工艺冲、切、折，在加工完成后工件会出现折弯回弹的征象，所以钣金件加工完成后的变化量相比较机械加工件要大，乃至出现毫米级别的也属正常。如许就会给我们编程丈量造成很大影响，使得测针不能很正确的丈量到工件需要丈量的位置，也很有可能步伐无 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>汉鑫</author>
      <pubDate>Wed, 14 Sep 2016 07:12:03 +0000</pubDate>
    </item>
    <item>
      <title>Calypso之曲线最佳拟合</title>
      <link>https://www.ommcmm.com/thread-1973-1-1.html</link>
      <description><![CDATA[在度量学中，拟合的理解是在算术上的形状偏差和位置偏差的分离。也就是说你可以利用最佳拟合去获得算术上关于位置偏差到名义曲线的修正。
简朴的说最佳拟合就是测量数值被平移和旋转直到均方根偏差最小，只有形状偏差保留在效果里。通常坐标的移动使测量曲线拟合到名义 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>朱以环</author>
      <pubDate>Wed, 31 Aug 2016 01:42:25 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之包容原则</title>
      <link>https://www.ommcmm.com/thread-1978-1-1.html</link>
      <description><![CDATA[在ISO8015中我们有一个Envelope requirment，译为包涵要求，也就是我们寻常看见的这个符号。我们也称为包涵原则。（Envelope principle）
在ISO8015中原话是这么说的：
For a single feature ,either a cylindrical surface ora feature establised by two surfaces(Fea ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>随意吧</author>
      <pubDate>Wed, 17 Aug 2016 01:23:08 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之盘形针校准</title>
      <link>https://www.ommcmm.com/thread-1977-1-1.html</link>
      <description><![CDATA[一样平常三坐标利用的测针重要有以下几种：

[*]球形测针
[*]盘形测针柱形测针：平底柱形测针和球底柱形测针
注：探针校准界面 - “几何形状”，显示不同范例测针，则相应范例测针可以校准，否则无法校准。购买测针前，请注意！

[*]对于VAST传感器，柱形测针和盘形测针 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>张士龙</author>
      <pubDate>Mon, 01 Aug 2016 03:11:16 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之联机问题简析</title>
      <link>https://www.ommcmm.com/thread-1979-1-1.html</link>
      <description><![CDATA[日常使用中，我们不可避免会碰到很多形形色色的问题。大概和软件设置，大概和操作，大概和设备有关。一篇文章无法包罗万象，只好进行点滴汇集，希望有所资助。对于有些问题（比如无法联机问题），我们起首必要进行一个初步判断，大概是设备有关，还是和软件有关。这样才 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>华夏战神</author>
      <pubDate>Fri, 29 Jul 2016 03:58:26 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之复合输出报告</title>
      <link>https://www.ommcmm.com/thread-1976-1-1.html</link>
      <description><![CDATA[Calypso可以输出很多类型的检测报告，比如尺度输出报告，紧凑输出报告，Excel报告，CAD视图报告，Piweb Basic报告等。请参考文章：Calypso应用之常用报告先容每种报告都有相应的路径进行设置。是否会觉得有点繁琐？在Calypso5.0及后续的版本中，增加了一个功能“复合输 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>鸭脚大侠</author>
      <pubDate>Tue, 05 Jul 2016 02:31:51 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用之CAD视图报告III</title>
      <link>https://www.ommcmm.com/thread-1971-1-1.html</link>
      <description><![CDATA[本日我们先容：在 CAD 视图陈诉中显示元素相干数据1 点击“元素”标签 - 勾选“元素” 2 根据需要，勾选需要输出的项目（和特性设置雷同）实际值，名义值，标识，上公差，下公差，偏差（实际值和名义值得差值），超出公差（显示超出公差部分的偏差） 3 根据需要，勾选元 ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>一悟所有</author>
      <pubDate>Wed, 08 Jun 2016 01:52:22 +0000</pubDate>
    </item>
    <item>
      <title>Calypso应用技巧之点云创建3D最佳拟合坐标系</title>
      <link>https://www.ommcmm.com/thread-1982-1-1.html</link>
      <description><![CDATA[对于叶轮或者转子类产品，第二基准轴不容易确定。

因此常用的坐标系创建的方式：1 坐标系的第二基准元素设为“空”，即不选择任何元素2 第二基准轴的确认通过两个过程完成2.1 产品的在三坐标大理石面的摆放方式和模型靠近2.2 创建3d最佳拟合坐标系来求解第二基准轴
3d ...]]></description>
      <category>【Zeiss_Calypso_蔡司】</category>
      <author>段盛全</author>
      <pubDate>Tue, 10 May 2016 06:26:32 +0000</pubDate>
    </item>
  </channel>
</rss>